- Home
- Implements
- Bale Handling
- Bale Fork
- Bale Fork L+ 150 Folding tines Bolt on Hooks prepared
Bale Fork L+ 150 Folding tines Bolt on Hooks prepared
Bale Fork for the farmer with high demand on efficiency. Available with both fixed and folding tines
High capacity Bale fork with fixed or foldable tines.
Available with accessories to further increase your productivity.
Ideal for large front loaders, Telehandlers and Wheel loaders.
In stock
SKU
11256472Q
Bale Fork L+ comes in two versions, either with fixed tine carriage or with foldable tine carriage. Foldable tine carriage allows the tines to be folded upwards for safer transporting on public roads. Foldable tines also permit easier release of the bale when in reverse. An accessory is available where the foldable tines can be hydraulically operated– increasing productivity further! The 1500mm wide frame is prepared for up to five Q-tines, this in combination with height extensions provide excellent support for two full Hesston bales or three mini-Hesston. A horizontal top beam can be added for additional support. Bale Fork L+ is compatible with all 80x80 Bolt on hooks which allows attaching to most common AG material handlers.
| Weight | 132 kg |
|---|---|
| Width | 152 cm |
| Depth | 22 cm |
| Height | 117 cm |
| SizeModel | 150 Folding tines |
| Tine dimension | Conus 2 |
| Working depth | 22 cm |
| Working width | 136 cm |
| Tine spacing | 34 |
| Number of Tines, max | 5 |
1. Implement
2. Select Bolt on Hook View Hook Guide
Start by selecting tool carrier to get the right options:
BoH 80x80 3-point linkage A
Read moreBolted hook for implements with 80x80 interface.
In stock
SKU:
11254879A
BoH 80x80 Euro/3PL combi
Read moreBolt on hook for implements with 80x80 interface. Euro / 3-point linkage combi hook allows you to mount the implement both on the loader and on the tractors front- or rear linkage.
Low availability
SKU:
11255998A
BoH 80x80 A-Frame A
Read moreBolt on hook for implements with 80x80 interface.
Low availability
SKU:
11256216A
BoH 80x80 Alo Type 3 A
Read moreBolted hook for implements with 80x80 interface.
Low availability
SKU:
11254509A
BoH 80x80 Atlas 65 - 26°
Read moreBolt on hook for implements with 80x80 interface.
Low availability
SKU:
11256500A
BoH 80x80 Atlas 95 -15°
Read moreBolt on hook for implements with 80x80 interface.
In stock
SKU:
11256380A
BoH 80x80 Bobcat/FDI/MF A
Read moreBolted hook for implements with 80x80 interface.
In stock
SKU:
11255102A
BoH 80x80 CAT TH A
Read moreBolted hook for implements with 80x80 interface.
In stock
SKU:
11255142A
BoH 80x80 CNH LM A
Read moreBolted hook for implements with 80x80 interface.
In stock
SKU:
11255100A
BoH 80x80 Claas/Kramer/Liebherr A
Read moreBolted hook for implements with 80x80 interface.
Fits Claas Scorpion, Kramer KT, Liebherr and Weidemann Telehandlers.
In stock
SKU:
11253575A
BoH 80x80 Dieci Large A
Read moreBolted hook for implements with 80x80 interface.
In stock
SKU:
11255242A
BoH 80x80 Dieci Medium A
Read moreBolted hook for implements with 80x80 interface.
In stock
SKU:
11255236A
BoH 80x80 Dieci Small A
Read moreBolted hook for implements with 80x80 interface.
In stock
SKU:
11255237A
BoH 80x80 Dieci XL
Read moreBolt on hook for implements with 80x80 interface.
Low availability
SKU:
11256848A
BoH 80x80 Euro -5deg A
Read moreBolted hook for implements with 80x80 interface. Euro hook with reduced rollback angle.
In stock
SKU:
11256057A
BoH 80x80 Faucheux White A
Read moreBolt on hook for implements with 80x80 interface.
In stock
SKU:
11256197A
BoH 80x80 Giant A
Read moreBolted hook for implements with 80x80 interface.
In stock
SKU:
11255328A
BoH 80x80 Hauer A
Read moreBolted hook for implements with 80x80 interface.
In stock
SKU:
11255143A
BoH 80x80 JCB Mini TH (Light weight) -11256770A
Read moreBolt on hook for implements with 80x80 interface. Recommended for JCB Loadall 514-40 Telehandler.
In stock
SKU:
11256770A
BoH 80x80 JCB Q-fit A
Read moreBolted hook for implements with 80x80 interface.
In stock
SKU:
11253571A
BoH 80x80 JCB TC Compact A
Read moreBolted hook for implements with 80x80 interface.
Low availability
SKU:
11255141A
BoH 80x80 JCB TC A
Read moreBolted hook for implements with 80x80 interface.
Low availability
SKU:
11256274A
BoH 80x80 JLG/Deutz Fahr A
Read moreBolted hook for implements with 80x80 interface.
In stock
SKU:
11255240A
BoH 80x80 Knikmops 120-140
Read moreBolt on hook for implements with 80x80 interface.
Recommended for Knikmops model 120-140.
Low availability
SKU:
11256853A
BoH 80x80 Knikmops 180-250
Read moreBolt on hook for implements with 80x80 interface.
Recommended for Knikmops model 180 - 250.
Low availability
SKU:
11256859A
BoH 80x80 Knikmops 80-100
Read moreBolt on hook for implements with 80x80 interface.
Recommended for Knikmops model 80-100.
Low availability
SKU:
11256852A
BoH 80x80 Kramer High A
Read moreBolted hook for implements with 80x80 interface.
Kramer High is used on machine types: 8115, KL43.8.
For older machines the same tool carrier is used on: 412 / 416 / 512 / 516 / 612SL / 616 / 620 / 621 / 680(343-01) / 712SL / 720 / 721 (T) / 780 (T) / 1150/ KL43.
In stock
SKU:
11255415A
BoH 80x80 Kramer Short A
Read moreBolted hook for implements with 80x80 interface.
Kramer Short is used on machine types: 2706 / 5055 / 5065 / 5075-5095 / 8085-8105 (including the T-models).
KL 19.5 / KL25.5 / KL31.5-KL37.5 / KL35.8-KL37.8 / KL25.5T / KL30.5T / KL30.8T / KL 35.8T / KT276.
For older machines the same tool carrier is used on:
2506 / 212 / 220 / 312 / 316 / 318 / 320 / 380 / 418 / 421 / 480 / 521 / 550 / 580 (T) / 650 / 680 (T) new / 750 (T) / 850, 950 and 8075
KL32 / KL35 / KL37 / KL 43 / KL27T / and KL35T / KT256.
In stock
SKU:
11255368A
BoH 80x80 MX A
Read moreBolted hook for implements with 80x80 interface.
In stock
SKU:
11253971A
BoH 80x80 Manitou MLT A
Read moreBolted hook for implements with 80x80 interface.
In stock
SKU:
11253572A
BoH 80x80 Merlo ZM2 A
Read moreBolted hook for implements with 80x80 interface.
In stock
SKU:
11253573A
BoH 80x80 Merlo ZM3 1-pin A
Read moreBolted hook for implements with 80x80 interface.
In stock
SKU:
11255137A
BoH 80x80 Merlo ZM3 3-pin A
Read moreBolted hook for implements with 80x80 interface.
In stock
SKU:
11255138A
BoH 80x80 Pin and Cone A
Read moreBolted hook for implements with 80x80 interface.
In stock
SKU:
11253574A
BoH 80x80 SMS A
Read moreBolted hook for implements with 80x80 interface.
Low availability
SKU:
11253940A
BoH 80x80 Schäffer Type KR A
Read moreBolted hook for implements with 80x80 interface.
Low availability
SKU:
11255104A
BoH 80x80 Schäffer Type SWH A
Read moreBolted hook for implements with 80x80 interface.
Low availability
SKU:
11255232A
BoH 80x80 Schäffer Square 336 A
Read moreBolted hook for implements with 80x80 interface.
In stock
SKU:
11255636A
BoH 80x80 Schäffer Square 442 A
Read moreBolt on hook for implements with 80x80 interface.
In stock
SKU:
11256269A
BoH 80x80 Schäffer VM A
Read moreBolted hook for implements with 80x80 interface.
Low availability
SKU:
11256163A
BoH 80x80 Sennebogen/Fendt A
Read moreBolted hook for implements with 80x80 interface.
BoH has two adjustable bolts intended to absorb forces and relieve the locking pin.
Low availability
SKU:
11256339A
BoH 80x80 Skid Steer A
Read moreBolted hook for implements with 80x80 interface.
In stock
SKU:
11254498A
BoH 80X80 Terex/Schaeff/Yanmar
Read moreBolt on hook for implements with 80x80 interface.
Low availability
SKU:
11256695A
BoH 80x80 Volvo BM Large A
Read moreBolted hook for implements with 80x80 interface.
Low availability
SKU:
11254149A
BoH 80x80 Volvo BM Small A
Read moreBolted hook for implements with 80x80 interface.
In stock
SKU:
11255145A
BoH 80x80 Weidemann 50-50 A
Read moreBolt on hook for implements with 80x80 interface.
Note, BoH Weidemann 50-50 can in lowest position and full rollback give collision between loader Z-linkage and following Implements;
Bale Fork L+ with Top beam mounted directly on frame.
Top Grip when configured for smallest bale size.
Silocut M+ 200 and 225 center cylinder.
In stock
SKU:
11256226A
BoH 80x80 Weidemann A
Read moreBolted hook for implements with 80x80 interface.
In stock
SKU:
11255106A
BoH 80x80 Zettelmeyer 402 A
Read moreBolted hook for implements with 80x80 interface.
In stock
SKU:
11255139A
BoH 80x80 Zettelmeyer 602 - JCB A
Read moreBolted hook for implements with 80x80 interface. Suitable for JCB 409 Loader. Older Z-link JCB loaders should use Zettelmeyer 602 - Standard.
In stock
SKU:
11255498A
BoH 80x80 Zettelmeyer 602 -26deg - Standard A
Read moreBolted hook for implements with 80x80 interface. Suitable for Volvo, Case, CAT and NH loaders.
Low availability
SKU:
11255500A
BoH 80x80 Zettelmeyer 602 -26deg - Claas A
Read moreBolt on hook for implements with 80x80 interface. Suitable for Claas loaders.
In stock
SKU:
11256254A
3. Select Tine sets
Tine Set 1240 mm, qty 5
Read moreHigh quality conus 2 Q-tines for bale handling implements.
In stock
SKU:
60038289
Tine Set, 820 mm, qty 5
Read moreHigh quality conus 2 Q-tines for bale handling implements.
In stock
SKU:
60038290
Tine set, 1240 mm, qty 2
Read moreHigh quality conus 2 Q-tines for bale handling implements.
In stock
SKU:
60038291
Tine set, 820 mm, qty 2
Read moreHigh quality conus 2 Q-tines for bale handling implements.
In stock
SKU:
60038292
Tine set, 1240 mm, qty 4
Read moreHigh quality conus 2 Q-tines for bale handling implements.
In stock
SKU:
60039071
Tine set, 820 mm, qty 4
Read moreHigh quality conus 2 Q-tines for bale handling implements.
In stock
SKU:
60039082
Tine Set, 820 mm, qty 3
Read moreHigh quality conus 2 Q-tines for bale handling implements.
In stock
SKU:
60059952
Tine Set, 1240 mm, qty 3
Read moreHigh quality conus 2 Q-tines for bale handling implements.
In stock
SKU:
60059951
4. Select Accessories
Extension beams
Extension beams complete L+
Read moreBale fork extension beams increases your productivity and support up to two Hesston bales or three mini-Hesston bales. Extension beams are easy to install and adjust in various heights. Comes as standard with support tines to secure the upper bale.
In stock
SKU:
60059576
Hose kit
Hose kit 3/8", 2x L=210cm, G3/8"90C - 3/4" TEMA (F)
Read moreBest choice for Volvo wheel loaders.
Hose kit with 2 hoses. 3/8" hoses L 210cm. Coupling towards implement: 3/8" BSPP, Coupling towards loader: 3/4" TEMA Quick Coupling Female.
Low availability
SKU:
11214915
Hose kit 1/2", 2x L=75cm, G3/8"90C - 1/2" ISO A (F)
Read moreHose kit with 2 hoses. 1/2" hoses L 75cm. Coupling towards implement: 3/8" BSPP, Coupling towards loader: 1/2" ISO A Quick Coupling Female.
In stock
SKU:
60013335
Hose kit 1/2", 2x L=125cm, G3/8"90C - M22x1,5 (F)
Read moreUniversal hose kit with 2 hoses with M22 female thread allows you to assemble the coupling you need, e.g. MX Mach 2.
1/2" hoses L 125cm. Coupling towards implement: 3/8" BSPP, Coupling towards loader: M22x1,5 Female.
In stock
SKU:
60013338
Top beam
Top beam complete L+ & XL+
Read moreBale fork top beam gives further support for the upper bale and connects right hand and left hand side which adds stength and stability. Suitable also when handling smaller bales. Height adjustments can still be done without disassembly by tilting the fork frame forwards and keeping frame parallel to the ground. Easy to install and can be assembled on top of extension beams aswell directly to bale fork frame.
In stock
SKU:
60058097
Folding tine kit (L+ & XL+)
Read moreMaximise comfort and operate the folding tines from the tractors cab. Hydraulic control of foldable tines is controlled by 3rd service. Cylinder and couplings is well protected by covering plate. Cylinder comes with overflow valve to protect 3rd service circuit from high pressure peaks. Connecting hoses to loader can be attached to overflow valve.
In stock
SKU:
60058100
Teeth protection
Teeth Protection kit 120-200
Read moreTransport your Quicke Implement safely along the road. The teeth protection easily kit covers the pointy tip of the tines that makes your Quicke Imlement safe for rad transports. Compatible with Quicke Bale forks, Stone forks and Soil Buckets with teeth.
In stock
SKU:
11256300Q
5. Select Assembly
None
Assembly BoH and other accessories
Assembly BoH
Quick-add product to cart
X
| or |
Upload via CSV
Note: Select CSV (; separated) file that contains: SKU (sku) and Quantity (qty) to add to cart
Download example