Bale Fork L+ 150 Fixed tines Bolt on Hooks prepared

Bale Fork for the farmer with high demand on efficiency. Available with both fixed and folding tines

High capacity Bale fork with fixed or foldable tines.
Available with accessories to further increase your productivity.
Ideal for large front loaders, Telehandlers and Wheel loaders.

Hook type:

BoH

Width (cm):

150

Tines:

Fixed Folding

Low availability

SKU

11256471Q

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Product details

Bale Fork L+ comes in two versions, either with fixed tine carriage or with foldable tine carriage. Foldable tine carriage allows the tines to be folded upwards for safer transporting on public roads. Foldable tines also permit easier release of the bale when in reverse. An accessory is available where the foldable tines can be hydraulically operated– increasing productivity further! The 1500mm wide frame is prepared for up to five Q-tines, this in combination with height extensions provide excellent support for two full Hesston bales or three mini-Hesston. A horizontal top beam can be added for additional support. Bale Fork L+ is compatible with all 80x80 Bolt on hooks which allows attaching to most common AG material handlers.

Technical specifications

More Information
Weight	109 kg
Width	152 cm
Depth	16 cm
Height	117 cm
SizeModel	150 Fixed tinesstring
Tine dimension	Conus 2
Working depth	16 cm
Working width	136 cm
Tine spacing	34
Number of Tines, max	5

Select Your Configuration

1. Implement

Bale Fork L+ 150 Fixed tines Bolt on Hooks prepared

Low availability

SKU: 11256471Q

2. Select Bolt on Hook View Hook Guide

Start by selecting tool carrier to get the right options:

BoH 80x80 3-point linkage A

Bolted hook for implements with 80x80 interface.

In stock

SKU: 11254879A

BoH 80x80 Euro/3PL combi

Bolt on hook for implements with 80x80 interface. Euro / 3-point linkage combi hook allows you to mount the implement both on the loader and on the tractors front- or rear linkage.

Low availability

SKU: 11255998A

BoH 80x80 A-Frame A

Bolt on hook for implements with 80x80 interface.

Low availability

SKU: 11256216A

BoH 80x80 Alo Type 3 A

Bolted hook for implements with 80x80 interface.

Low availability

SKU: 11254509A

BoH 80x80 Atlas 65 - 26°

Bolt on hook for implements with 80x80 interface.

Low availability

SKU: 11256500A

BoH 80x80 Atlas 95 -15°

Bolt on hook for implements with 80x80 interface.

In stock

SKU: 11256380A

BoH 80x80 Bobcat/FDI/MF A

Bolted hook for implements with 80x80 interface.

In stock

SKU: 11255102A

BoH 80x80 CAT TH A

Bolted hook for implements with 80x80 interface.

In stock

SKU: 11255142A

BoH 80x80 CNH LM A

Bolted hook for implements with 80x80 interface.

In stock

SKU: 11255100A

BoH 80x80 Claas/Kramer/Liebherr A

Bolted hook for implements with 80x80 interface.

Fits Claas Scorpion, Kramer KT, Liebherr and Weidemann Telehandlers.

In stock

SKU: 11253575A

BoH 80x80 Dieci Large A

Bolted hook for implements with 80x80 interface.

In stock

SKU: 11255242A

BoH 80x80 Dieci Medium A

Bolted hook for implements with 80x80 interface.

In stock

SKU: 11255236A

BoH 80x80 Dieci Small A

Bolted hook for implements with 80x80 interface.

In stock

SKU: 11255237A

BoH 80x80 Dieci XL

Bolt on hook for implements with 80x80 interface.

Low availability

SKU: 11256848A

BoH 80x80 Euro -5deg A

Bolted hook for implements with 80x80 interface. Euro hook with reduced rollback angle.

In stock

SKU: 11256057A

BoH 80x80 Faucheux White A

Bolt on hook for implements with 80x80 interface.

In stock

SKU: 11256197A

BoH 80x80 Giant A

Bolted hook for implements with 80x80 interface.

In stock

SKU: 11255328A

BoH 80x80 Hauer A

Bolted hook for implements with 80x80 interface.

In stock

SKU: 11255143A

BoH 80x80 JCB Mini TH (Light weight) -11256770A

Bolt on hook for implements with 80x80 interface. Recommended for JCB Loadall 514-40 Telehandler.

In stock

SKU: 11256770A

BoH 80x80 JCB Q-fit A

Bolted hook for implements with 80x80 interface.

In stock

SKU: 11253571A

BoH 80x80 JCB TC Compact A

Bolted hook for implements with 80x80 interface.

Low availability

SKU: 11255141A

BoH 80x80 JCB TC A

Bolted hook for implements with 80x80 interface.

Low availability

SKU: 11256274A

BoH 80x80 JLG/Deutz Fahr A

Bolted hook for implements with 80x80 interface.

In stock

SKU: 11255240A

BoH 80x80 Knikmops 120-140

Bolt on hook for implements with 80x80 interface.

Recommended for Knikmops model 120-140.

Low availability

SKU: 11256853A

BoH 80x80 Knikmops 180-250

Bolt on hook for implements with 80x80 interface.

Recommended for Knikmops model 180 - 250.

Low availability

SKU: 11256859A

BoH 80x80 Knikmops 80-100

Bolt on hook for implements with 80x80 interface.

Recommended for Knikmops model 80-100.

Low availability

SKU: 11256852A

BoH 80x80 Kramer High A

Bolted hook for implements with 80x80 interface. Kramer High is used on machine types: 8115, KL43.8. For older machines the same tool carrier is used on: 412 / 416 / 512 / 516 / 612SL / 616 / 620 / 621 / 680(343-01) / 712SL / 720 / 721 (T) / 780 (T) / 1150/ KL43.

In stock

SKU: 11255415A

BoH 80x80 Kramer Short A

Bolted hook for implements with 80x80 interface. Kramer Short is used on machine types: 2706 / 5055 / 5065 / 5075-5095 / 8085-8105 (including the T-models). KL 19.5 / KL25.5 / KL31.5-KL37.5 / KL35.8-KL37.8 / KL25.5T / KL30.5T / KL30.8T / KL 35.8T / KT276. For older machines the same tool carrier is used on: 2506 / 212 / 220 / 312 / 316 / 318 / 320 / 380 / 418 / 421 / 480 / 521 / 550 / 580 (T) / 650 / 680 (T) new / 750 (T) / 850, 950 and 8075 KL32 / KL35 / KL37 / KL 43 / KL27T / and KL35T / KT256.

In stock

SKU: 11255368A

BoH 80x80 MX A

Bolted hook for implements with 80x80 interface.

In stock

SKU: 11253971A

BoH 80x80 Manitou MLT A

Bolted hook for implements with 80x80 interface.

In stock

SKU: 11253572A

BoH 80x80 Merlo ZM2 A

Bolted hook for implements with 80x80 interface.

In stock

SKU: 11253573A

BoH 80x80 Merlo ZM3 1-pin A

Bolted hook for implements with 80x80 interface.

In stock

SKU: 11255137A

BoH 80x80 Merlo ZM3 3-pin A

Bolted hook for implements with 80x80 interface.

In stock

SKU: 11255138A

BoH 80x80 Pin and Cone A

Bolted hook for implements with 80x80 interface.

In stock

SKU: 11253574A

BoH 80x80 SMS A

Bolted hook for implements with 80x80 interface.

Low availability

SKU: 11253940A

BoH 80x80 Schäffer Type KR A

Bolted hook for implements with 80x80 interface.

Low availability

SKU: 11255104A

BoH 80x80 Schäffer Type SWH A

Bolted hook for implements with 80x80 interface.

Low availability

SKU: 11255232A

BoH 80x80 Schäffer Square 336 A

Bolted hook for implements with 80x80 interface.

In stock

SKU: 11255636A

BoH 80x80 Schäffer Square 442 A

Bolt on hook for implements with 80x80 interface.

In stock

SKU: 11256269A

BoH 80x80 Schäffer VM A

Bolted hook for implements with 80x80 interface.

Low availability

SKU: 11256163A

BoH 80x80 Sennebogen/Fendt A

Bolted hook for implements with 80x80 interface.

BoH has two adjustable bolts intended to absorb forces and relieve the locking pin.

Low availability

SKU: 11256339A

BoH 80x80 Skid Steer A

Bolted hook for implements with 80x80 interface.

In stock

SKU: 11254498A

BoH 80X80 Terex/Schaeff/Yanmar

Bolt on hook for implements with 80x80 interface.

Low availability

SKU: 11256695A

BoH 80x80 Volvo BM Large A

Bolted hook for implements with 80x80 interface.

Low availability

SKU: 11254149A

BoH 80x80 Volvo BM Small A

Bolted hook for implements with 80x80 interface.

In stock

SKU: 11255145A

BoH 80x80 Weidemann 50-50 A

Bolt on hook for implements with 80x80 interface. Note, BoH Weidemann 50-50 can in lowest position and full rollback give collision between loader Z-linkage and following Implements; Bale Fork L+ with Top beam mounted directly on frame. Top Grip when configured for smallest bale size. Silocut M+ 200 and 225 center cylinder.

In stock

SKU: 11256226A

BoH 80x80 Weidemann A

Bolted hook for implements with 80x80 interface.

In stock

SKU: 11255106A

BoH 80x80 Zettelmeyer 402 A

Bolted hook for implements with 80x80 interface.

In stock

SKU: 11255139A

BoH 80x80 Zettelmeyer 602 - JCB A

Bolted hook for implements with 80x80 interface. Suitable for JCB 409 Loader. Older Z-link JCB loaders should use Zettelmeyer 602 - Standard.

In stock

SKU: 11255498A

BoH 80x80 Zettelmeyer 602 -26deg - Standard A

Bolted hook for implements with 80x80 interface. Suitable for Volvo, Case, CAT and NH loaders.

Low availability

SKU: 11255500A

BoH 80x80 Zettelmeyer 602 -26deg - Claas A

Bolt on hook for implements with 80x80 interface. Suitable for Claas loaders.

In stock

SKU: 11256254A

3. Select Tine sets

Tine Set 1240 mm, qty 5

High quality conus 2 Q-tines for bale handling implements.

In stock

SKU: 60038289

Tine Set, 820 mm, qty 5

High quality conus 2 Q-tines for bale handling implements.

In stock

SKU: 60038290

Tine set, 1240 mm, qty 2

High quality conus 2 Q-tines for bale handling implements.

In stock

SKU: 60038291

Tine set, 820 mm, qty 2

High quality conus 2 Q-tines for bale handling implements.

In stock

SKU: 60038292

Tine set, 1240 mm, qty 4

High quality conus 2 Q-tines for bale handling implements.

In stock

SKU: 60039071

Tine set, 820 mm, qty 4

High quality conus 2 Q-tines for bale handling implements.

In stock

SKU: 60039082

Tine Set, 820 mm, qty 3

High quality conus 2 Q-tines for bale handling implements.

In stock

SKU: 60059952

Tine Set, 1240 mm, qty 3

High quality conus 2 Q-tines for bale handling implements.

In stock

SKU: 60059951

4. Select Accessories

Teeth protection

Teeth Protection kit 120-200

Transport your Quicke Implement safely along the road. The teeth protection easily kit covers the pointy tip of the tines that makes your Quicke Imlement safe for rad transports. Compatible with Quicke Bale forks, Stone forks and Soil Buckets with teeth.

In stock

SKU: 11256300Q

Extension beams

Extension beams complete L+

Bale fork extension beams increases your productivity and support up to two Hesston bales or three mini-Hesston bales. Extension beams are easy to install and adjust in various heights. Comes as standard with support tines to secure the upper bale.

In stock

SKU: 60059576

Top beam

Top beam complete L+ & XL+

Bale fork top beam gives further support for the upper bale and connects right hand and left hand side which adds stength and stability. Suitable also when handling smaller bales. Height adjustments can still be done without disassembly by tilting the fork frame forwards and keeping frame parallel to the ground. Easy to install and can be assembled on top of extension beams aswell directly to bale fork frame.

In stock

SKU: 60058097

5. Select Assembly

None

Assembly BoH and other accessories

Assembly BoH

Quick-add product to cart

No.	SKU	Qty	Action
1

Upload via CSV

Note: Select CSV (; separated) file that contains: SKU (sku) and Quantity (qty) to add to cart

Download example

« Back